設定您的PACK

1. Charge it first. Press the two release buttons to take the PACK off its mounting plate and hold the magnetic charging cable near the contacts on its underside. The magnet pulls the cable into place. The red LED goes off when the PACK is full, after about 2 hours (see Battery, charging and tracking modes).
2. 安裝應用程式。請從 App Store 或 Google Play 下載免費的 TRAKSIFY Protect 應用程式，選擇您的語言並建立帳號。請使用我們寄給您的 4 位數驗證碼來確認您的電子郵件。
3. Add your PACK. Right after registration, scan the QR code on top of your PACK. The app recognises the PACK (TS-800AG) automatically. Always scan the code rather than typing the numbers, to avoid errors.
4. Complete your owner profile. Add your details and verify your mobile number with the 4-digit SMS code.
5. 建立您愛犬的資料檔案。請填寫牠的名字、品種、上傳照片，以及任何撿到牠的人應該知道的資訊。
6. Switch it on. Press and hold the side SOS (ON/OFF) button until the white LED comes on briefly, then release it. The green and blue LEDs blink until the PACK is connected and has its first position. This usually takes about a minute and can take up to 3 minutes. You can do this indoors: the PACK uses Wi-Fi positioning indoors and satellite positioning outdoors. Then check the map.
7. 在住家周圍劃設一個「安全區域」，並設定提醒功能（請參閱「地理圍欄」、「安全區域」與「提醒」）。
8. Fit it to the collar. Place the mounting plate on your dog’s collar. Pass the soft silicone strap under the collar and hook its four eyelets onto the sides of the plate, so the collar sits between the plate and the strap. Attach the safety tag’s ring to the loop on the side of the plate, then snap the PACK on and gently pull it to check that it is secure. The PACK fits collars from 16 to 28 mm.

注意：日後若要新增另一台裝置，請前往「設定」→「我的裝置」→「+」，或點選主畫面上的「註冊裝置」磁貼。

指示燈的含義

• Green LED blinking: no mobile data connection yet.
• Blue LED blinking: no GPS position yet.
• 兩者皆關閉：已連接狀態與傳送狀態。

Note: All LED signals, the battery check and the SOS button are explained in the full PACK user guide at traksify.com/download/pack.